Archive author
Mark R. Hollensen
36 indexed articles · 2016–2024
Published work
Articles by Mark R. Hollensen
Beretta Cheetah Model 84
work on one demonstrates key points common to them all.
Marlin Ballard
in the spotlight.
Steyr Mannlicher SSG
The case of the sticky Steyr. How I found and addressed issues with a Steyr Mannlicher SSG-69 PI bolt action rifle.
Taurus 605 Poly Protector
Working the Taurus 605 “Protector Poly” revolver.
FN Model 1949 and Variants
Working the semi-automatic FN Model 1949 or SAFN/FN-49 rifles and variants.
Llama 1911 Magazine Fitting
Working with and fitting aftermarket magazines for the Spanish Llama-Gabilondo y Cia SA 1911 1XA pistol.
Gunsmithing Business Tips, Part 3
An overview to working as a gunsmith.
Gunsmithing Business Tips, Part 2
Insights into the persona of gunsmiths.
Gunsmithing Business Tips, Part 1
A guide to education for the aspiring gunsmith.
Winchester 1890
The case of the poorly-lined Winchester 1890 barrel. Here’s how I refurbished this classic 22 Short takedown rifle.
The “Manurhin Candidate”
There were times when I would only occasionally see a Manurhin revolver come in for service or repairs, and even then, primarily for cleaning and inspection. Over the past few years I have seen them come in more regularly and they all…
Mauser HSc
Firearms history wouldn’t be complete without the introduction of the German manufactured HSc pistol during World War II, after development of a blowback-designed pistol dating back to 1934 at Mauser Obendorf in Neckar, Germany. Research shows that Mauser began actual production of…
IMI Jericho Model 941F
Israeli Military Industries makes a number of effective firearms, the Jericho Model 941F pistol among them. Here’s how to work it.
The AR-7
Working the Charter Arms AR-7 Explorer rifles and variants.
Ithaca Flues Shotgun
How I repaired an Ithaca Flues 16 gauge double shotgun.
Rogers & Spencer Revolver
Working on the Rogers & Spencer .44 revolver converted to centerfire from percussion caps and blackpowder.
MAB Pistol
Working the MAB Model D, Type II, 7.65mm pistol.
Lefever Shotguns
Info on working the Lefever Nitro Special double shotgun.
The Business of Gunsmithing
Every professional gunsmith had to answer the, “How do I get started?” question. Here is a summary of my practical strategic compendium for gunsmiths that want to go professional.
Inspecting Your Work
Once upon a time, there was a Glock G19 in my shop… Here’s the story and what I learned about inspecting and documenting my gunsmith work.
Remington Model 10
Marketed as the Remington Repeating Shotgun, the Model 10 is a classic, battle-tested pump action.
Sterling Arms Double Shotgun
Yes, they really made one. Here’s how to work the Sterling Arms Corporation side-by-side 12 gauge double shotgun.
Nambu Type 14
The Japanese Nambu Type 14 in 8x22mm is not as uncommon as you think. Here’s how to handle one if it should cross your bench.
Colt 1889 Revolver
The Colt 1889 is a precedent-setting double-action revolver designed before the Smith & Wesson patent. Here’s what you need to know to work on them.