Strike Hold

Gun is a fast-acting, penetrating cleaner and lubricant. Originally developed for the U. S. military, it goes on wet and dries in place, leaving a hard finish coating that protects weapons by deterring carbon build-up, contaminants, and corrosion in all weather conditions. As a cleaner, it removes firing residues, gum build-up as well as foreign debris from weapons components. As a lubricant, it contains synthetic-based additives that act like microscopic ball-bearings to reduce friction.

Strike Hold Strike Hold Gun has been battle tested on all types of weapons systems from 9mm pistols to M110 sniper rifles, M4 to .50 caliber, field artillery, and even M1A2 Abrams tanks. Its capillary action coats and reaches all surfaces without retaining dirt, dust, and particulates. It provides along-lasting dry lubricant to greatly reduce friction while preventing carbon build up and removing rust, lead, and copper.

Strike Hold Gun can be repeatedly sprayed onto a surface without gummy build up and it won’t harm materials such as rubber, paint, most plastics, and wood finishes. It contains no CFCs or other ozone-depleting substances by using a non-flammable CO2 propellant. The formulation was created by Michael Huggard (formerly of the 504th Parachute Infantry Regiment, 82nd Airborne Division) to help troops that were experiencing a weapon failure rate of almost 50% due to a sandy, desert environment.

After a request by several Major Generals to fix this, Huggard’s solution formed the basis of Strike Hold that works as a lubricant, protectant, and cleaner.

Use of this solution reduced the failure rate to nearly zero. "As a retired Special Forces operator and primary Armorer for the 101st Air Assault Division under General David Petraeus, I can attest to the fact that Strike Hold is by far the most effective cleaner and lubricant on weapons.", says David Foster, Jr. "One of my Ruger Mini 14 rifles has spent close to 30 hours afield with me, and recently when I disassembled it to clean it the Strike Hold was still doing a fine job," says Alaskan gun owner Vic Kennard. "I only needed to clean burnt powder and copper from the action and bore.

The big cold -50 to -65 below are still weeks away, but with what I can see the moisture has not defeated the Strike Hold." Strike Hold’s parent company, Force 5, also makes a line of lubricants and cleaners for HVAC, automotive, and marine use in addition to firearms. Case lot sales are available. Contact or StrikeHold.com for more information.

Continue reading

More from the archive

More from this issue

More from this author

Popular Bigotry

By February 2024

Americans owning guns area large group but remain a minority. We are arguably the only group that remains socially acceptable to hate or defame. Even groups and individuals professing to be moderate and in favor of “common sense” policy have openly stated…

Gemini Chokes

By January 2024

(Winshoot s.r.l.) has been producing choke tubes for several years, cataloging over 1.200 interchangeable choke tubes available in several materials, dimensions, finishes, and brands. This includes options for shotguns no longer on the market. Gemini emphasizes sport shooting in a variety of…

Marksmanship Simplified

By December 2023

George Harris has spent his life working with firearms. He co-founded the SIG Sauer Academy in 1990 and was a coach and team member of the U. S. Army Reserve Marksmanship Program, retiring to create International Firearms Consultants. Marksmanship Simplified is his…

Related workshop reading

Reader Forum

Reader Forum March 2023

Flitz on Nickel Plate I started working on a nickel-plated S&W Model 10 made in 1977 that had been exposed to something that dulled the finish. Not terrible, but it needs some areas touched up. Is Flitz good for polishing a nickel-plated…

Seattle Engraving

By August 2022

Here’s a way to make guns more exotic for your customers. Contracting with a company like Seattle Engraving allows any shop with an FFL sell customization options for serious profit.

Digital edition

September 2020

Opening…
MFGAxis Discussion Reader conversation for this Gunsmith Magazine piece Like, save, or comment using the InnoNet-powered reader system. Saves stay in your Gunsmith Magazine library.
Be the first to engage.

MFGAxis Discussion

Be the first to engage.
Save & notes

MFGAxis

Reading tools

Continue with MFGAxis to save articles, notes, and reading lists.