Working the Smith & Wesson .45 Model No. 3 Schofield Revolvers
With modifications patented by Major George W. Schofield, Smith & Wesson’s top-break Mod el No. 3 revolver became a well-known and well-respected sidearm for the U. S. Cavalry.
Gunsmith Magazine
Article library
Full web articles from the American Gunsmith archive, organized for search and connected back to their original issue pages.
Reader Forum
Mosin-Nagant Conversion? I have a M44 Mosin-Nagant that I would like to rebarrel to .30-30 Win. What are your thoughts on this idea? Will the smaller rim diameter of the .30-30 cause me any problems? If so, how do you recommend I…
Firearm Industry Granted Consultative Role to United Nations
The firearm and ammunition industry now has a seat at the world table of the United Nations. The 191-country international-relations body has granted official consultative status to the Sporting Arms and Ammunition Manufacturers Institute (SAAMI). SAAMI, founded in 1926, publishes voluntary industry…
Disassembly and Reassembly Of the Remington Model 51
Once related to a “secret weapon” by the U. S. military, the Model 51 was the only self-loader originated by Remington.
Make a Mini-Router For Installing Swivel Bases
While two-screw swivel bases can certainly be installed by chiseling a mortise into the stock and forearm, there is an easier, more accurate way to get this task accomplished.
Tech Topics
In this feature, we examine new tools and tooling, tips and techniques, and news items of interest to the gunsmithing community.
Chamfer Revolver Chamber Edges Without Disassembling the Cylinder
Chamfering the cylinder’s chamber edges allows for faster and easier loading— especially when using a speedloader. In many cases, this technique can be used with the cylinder still in the revolver.
Breaking Down the L. C. Smith Double-Barreled Shotgun
These side-lock doubles, manufactured for more than 60 years, differ in a few significant ways from other double guns of the period.
Reader Forum
Forum Feedback I have a few comments to add on letters in the September issue: Regarding Stu Grell’s problem with the Remington 742 not recocking, the disconnector is mis-positioned on the wrong side of the trigger bar. This is a common problem…
Governor Jeb Bush Signs Florida’s New Self Defense law
In a recent ceremony at the state capitol, Gov. Jeb Bush signed Florida’s “Castle Doctrine” into law. Sponsored by Senator Durell Peaden and Representative Dennis Baxley, the bill (SB-436) unanimously passed the Senate and overwhelmingly passed in the House, 94-20. Prior to…
The Anatomy of the Savage Model 24
After making its de but over 50 years ago the Model 24 has be come far more than just a lost hiker’s best friend.
Big-Boy Caliber Conversions: The .400 Cor Bon and .460 Rowland
Conversion of the M1911 to these interesting calibers is simple, relatively speaking, with these custom “drop-in” barrels.
Basic Repairs With Brownells Acraglas
Acraglas epoxy, once cured, produces a bond as strong as the original material itself. What’s more, it can be shaped, dyed, and textured to match most wood and plastic surfaces.
Gunstock Checkering: Beyond the Basics
Once you understand the basics and have mastered the application of simple patterns, it’s time to move ahead. Here, we’ll cover some of the more advanced skills and more involved checkering patterns.
Simple Action Work On the Browning Hi-Power
Opinions differ as to which was John Browning’s best pistol design. The fact remains, however, that the Hi-Power is a great all-around pistol, and one that can be improved greatly with a small amount of attention.
Reader Forum
Restoration and Refinishing Feedback I’ve been meaning to tell you that since joining The American Gunsmithing Association I have been looking through old issues for the perfect “restoration” article. I have now found it, thanks to you! Please pass on to Bill…
Senate Passes Reform to Stop ‘Junk’ Lawsuits
Just prior to this issue going to press, Congress took a major step toward restoring fairness and integrity to the nation’s judicial system, as the Senate passed a landmark bill to block lawsuits that seek to hold firearms manufacturers liable for the…
Meet the Ruger Mark III: A Guide to Disassembly and Reassembly
Don’t make the mistake of assuming it takes down and goes together like the Mark I and Mark II. The new Mark III is a decidedly different animal.
A Scope-Mounting System for .22 Rimfire Semi-Auto Handguns
Scoping those fine .22 rimfire semi-automatic handguns may not be an everyday job, but if the need arises, there is a practical way to do it, and the results may amaze you.
In-Shop Barrel Porting And Lapping–In One Process
Here’s a way to do two gunsmithing tasks at the same time—barrel porting and barrel lapping—which will save you time and impress your customer with enhanced accuracy and improved gun handling.
‘Slicking Up’ the Kel-Tec Semi-Automatic Pistol
Pistols manufactured by Kel-Tec CNC Industries Inc. are compact, lightweight, inexpensive, and generally reliable. They can, however, benefit from the attentions of a gunsmith familiar with the pistol’s unique action.
Reworking the Beretta U22 Neos Trigger
Known for a less-than-stellar trigger, the Neos can be improved with some attention to de tail, attention to the takedown article that ap peared here last year, and not too much attention to what you read on the internet.
Reader Forum
High Standard Flite Plan? I’m writing to ask if anyone on the staff knows where I might find a breakdown or schematic for a 12-gauge Hi-Standard Flite-King Deluxe? I would appreciate any help on this matter. The gun is in excellent condition,…
NRA Offers Free Disability-Awareness Book
The National Rifle Association’s Disabled Shooting Services Department receives thousands of requests annually for guidance with disability-related hunting and shooting-sports problems. More than a few callers tell of being refused entry into an activity because the local organizers have no idea how…