Digital edition
April 2014
Digital edition
Inside this issue
Browse the contents, search the full issue, or open any section at its first page.
6 articles · 29 pages
Page 5
More From Bill’s Bench
Tips from Gunsmith William L. Henwood, Quincy CA 95971, Holding Tapered Parts Tired of having tapered parts, such as barrels, squirting out of your machine or bench vise? These jaw liners will tightly grip parts with a tapering…
Pages 6–11
Remington 760 Assembly/Disassembly
This iconic, century-old pump action rifle is still going strong.
Pages 12–16
Building The 90 Grain AR-15, Part One
An overview of building competition/precision .223/5.56 AR-15 rifles to handle the heavy bullet, long-range loads.
Pages 17–20
Precision Barrel Fitting, Part One
The first in a series to guide gunsmiths with some machine tool experience for chambering and fitting a rifle barrel safely.
Pages 21–25
The Ruger LCP
Common problems with Ruger’s Lightweight Compact Pistol and getting it up and running.
Pages 26–27
Reader Forum
Shotgun and Back Issues I’m writing for help identifying a 12 gauge shotgun I recently bought. The shotgun is marked “National Fire- Arms Co.” on the barrel, “12 GA.” on top of the chamber and “Modified Choke” on…
In This Collection
- More From Bill’s Bench p. 2
- Remington 760 Assembly/Disassembly pp. 3-8
- Building The 90 Grain AR-15, Part One pp. 9-13
- Precision Barrel Fitting, Part One pp. 14-17
- The Ruger LCP pp. 18-21
- Reader Forum pp. 22, 24
MFGAxis Discussion